New
OBDSTAR MP001 – EEPROM / MCU programmer for OBDSTAR tablets
- EEPROM and MCU read / write, BOOT mode and ECU cloning.
- For DC706, MotoMaster, MK70, P50 and Key Master DP Plus; already supplied with the Key Master G3.
- Takes over the functions of the P003 and P003+; mandatory for SIMOS18 cloning.
- Full kit, or reduced kit for the DC706.
- Genuine OBDSTAR hardware, manufacturer warranty
- Tracked worldwide shipping
- Engineers available Monday to Saturday
- Secure payment: card, bank transfer
A question before ordering?An MFT Dev engineer checks the right configuration for your vehicles with you.
Ask an engineerThe OBDSTAR MP001 is the multifunction programmer for OBDSTAR tablets. Connected to your DC706, MotoMaster, P50 or Key Master DP Plus, it adds EEPROM and MCU read and write, work in BOOT mode and cloning of ECUs that need more than an OBD connection: engine, gearbox, body, motorcycle, jet ski. It takes over all the functions of the former P003 and P003+ adapters.
- 12inputs / outputs: enough for SIMOS18 ECUs
- 12 / 24 Vcar and heavy-truck power supply
- Unboundnot tied to a device, usable on several tablets
- 2kits: full, or reduced for the DC706
🧩 What you do with the MP001
EEPROM and MCU
Read and write of EEPROM memories and microcontrollers, on the C4-01 board or by soldering the W004 / W005 wires onto the circuit board.
ECU cloning
With the DC706: the engine, gearbox and BMS / VCU ECUs and the locked MD1 / MG1 marked MP001 in the OBDSTAR list, in BOOT mode, BDM or JTAG. SIMOS18 cloning requires the MP001.
Immobiliser
PIN code reading, IMMO OFF, BSI / BCM data processing, key reactivation (Renew), with the tablets that offer these functions.
Motorcycles
With the MotoMaster or the MK70: memory reading of motorcycle ECUs and clusters, and bench cloning of motorcycle ECUs.
📋 Which version to choose?
The MP001 unit is the same in both kits. Only the accessories change.
| Version | Contents | Who it is for |
|---|---|---|
| Full kit | MP001, C4-01 board, C4-02 soldering board (8-pin chips), W004 and W005 wires, BENCH-A V3 and BENCH-B V2 bench harnesses, P004 adapter, jumper wires (6 types) | MotoMaster, MK70, P50, Key Master DP Plus: everything is in the box |
| Kit for DC706 | MP001, C4-01 board, W004 and W005 wires, BENCH-A V3 bench harness | DC706: the tablet already comes with the P004 adapter, the BENCH-B V2 harness and the jumper wires |
Good to know: the MP001 only works with an OBDSTAR tablet, not on a PC. It is already supplied with the Key Master G3. The ECU Master does not need it: its bench and programmer ports do the same job. The functions available depend on the tablet and its licences.
Professional and lawful use only. Reading a cluster’s memory is for transferring the real mileage after an instrument cluster is replaced or repaired. Altering a mileage reading to deceive a buyer is a criminal offence in every European Union country.
📦 Box contents
- Full kit: MP001 programmer, C4-01 and C4-02 boards, W004 and W005 wires, BENCH-A V3 and BENCH-B V2 harnesses, P004 adapter, jumper wires (6 types)
- Kit for DC706: MP001 programmer, C4-01 board, W004 and W005 wires, BENCH-A V3 harness
Your P002 and P003 cables (Toyota 8A all keys lost, Ford all keys lost, Honda motorcycle, Yamaha / Suzuki motorcycle) plug directly into the MP001.
⚙️ Technical specifications
| Compatibility | OBDSTAR DC706, MotoMaster, MK70, P50, Key Master DP Plus; supplied with the Key Master G3; no PC connection |
|---|---|
| Processor | STM32F407VET6 |
| Connectors | Power, female OBD, male OBD, DB9, DB25 (C4-xx boards) |
| Power supply | 12 V / 24 V |
| Temperature | Operating −10 °C to +55 °C |
| Dimensions / weight | 165 × 110 × 35 mm · approx. 260 g |
| Updates | Through the OBDSTAR tablet software, no separate subscription |
✅ Why buy from MFT Dev
- We tell you which kit to get based on your tablet and your ECUs.
- Tuning engineers who answer, Monday to Saturday, in French, English and Spanish.
- Tracked shipping worldwide, secure payment by card or bank transfer.
❓ Frequently asked questions
Can I use the same MP001 on two tablets?
Yes. It is not tied to any device.
I have a P003+: do I need the MP001?
The MP001 does everything the P003+ does, and more. It is mandatory for some ECUs, such as SIMOS18 cloning, which the P003+ cannot handle.
Does the kit for DC706 work on another tablet?
The unit is the same, but the C4-02 board, the P004 adapter, the BENCH-B V2 harness and the jumper wires are missing. On a tablet other than the DC706, get the full kit.
Hardware is shipped worldwide with tracking; delivery time and cost are shown at checkout before you pay. Software and activations are delivered by email or directly on your tool. Pay by card or bank transfer. Professionals can spread tools over €2,000 excl. VAT in several instalments through MFT Hub.
Will this tool work with my vehicles?
Tell us the makes, ECUs and the work you do: an engineer confirms the right version and protocols before you order.
Is the manufacturer’s warranty included?
Yes, the manufacturer’s warranty applies. We handle the procedure with the manufacturer for you.
Can I get my tuning files from you?
Yes. Create your free garage account on the MFT Dev Files Service: our engineers write your files and send them back encoded for your tool, Monday to Saturday.
OBDSTAR MP001 – EEPROM / MCU programmer for OBDSTAR tablets
