Skip to content
Black Friday MFT Dev from 23 November to 5 December: save the date See the offers
EnglishEN FrançaisFR EspañolES DeutschDE ItalianoIT PortuguêsPT PolskiPL
0 Garage account
OBDSTAR TCM Kit 1, VAG DSG gearbox connectors New
OBDSTAR To order · 1 week

OBDSTAR TCM Kit 1 + Converter V2 – VAG DSG gearbox connectors

  • 7 moulded connectors: DQ200, DQ250, DL501, DL382, DQ380 / 381 / 500, VL381, VL300.
  • Cloning, read / write and immobiliser data, no jumpers.
  • Via the diagnostic socket or on the bench.
  • Converter V2 included to connect a diagnostic tool from another brand.
€84.90excl. VAT

To order – ships within 1 week

  • Genuine OBDSTAR hardware, manufacturer warranty
  • Tracked worldwide shipping
  • Engineers available Monday to Saturday
  • Secure payment: card, bank transfer

A question before ordering?An MFT Dev engineer checks the right configuration for your vehicles with you.

Ask an engineer

The OBDSTAR TCM Kit 1 brings together the moulded connectors for Volkswagen Group automatic and DSG gearboxes (VW, Audi, Seat, Skoda) and the Converter V2. You read immobiliser data, clone and read / write the gearbox ECU map, via the diagnostic socket or on the bench, with no jumpers or soldering.

  • 7gearbox connectors, TCM-001 to TCM-007
  • 0jumpers to wire: dedicated moulded plugs
  • OBD / benchon the vehicle or with the ECU removed
  • Third-party toolcompatible thanks to the Converter V2

⚙️ Gearboxes covered

TCM-001 TEMIC DQ200 (0AM / 0CW), 7-speed dry-clutch DSG
TCM-002 TEMIC DQ250 (02E / 0D9), 6-speed wet-clutch DSG
TCM-003 TEMIC DL501 (0B5), Audi 7-speed S tronic
TCM-004 TEMIC DL382, Audi 7-speed S tronic
TCM-005 BOSCH DQ380 / DQ381 / DQ500 (0DE)
TCM-006 TEMIC VL381 (0AW), Audi multitronic
TCM-007 TEMIC VL300 (01J), Audi multitronic

🔧 What you do with the kit

🧬

Cloning

The replacement ECU takes over the data, adaptations and immobiliser of the original one.

🗺️

Read / write

Map read and write, immobiliser data reading.

🔌

Converter V2

After cloning, connect your diagnostic tool to the harness to read gearbox fault codes and live data.

Good to know: the TCM Kit 1 is already included in the RH850 / V850 Full kit. On the Key Master G3, cloning and writing require the ECU Flasher activation (paid option).

📦 Contents

  • TCM Kit 1 harness with TCM-001 to TCM-007 connectors
  • Converter V2 (OBD to HDB15 adapter)

🛠️ Technical specifications

Compatibility OBDSTAR ECU Master, Key Master G3, DC706 and other OBDSTAR tools; third-party tools with the Converter V2
Connection Diagnostic socket or bench, gearbox ECU on the vehicle or removed
Updates Through the OBDSTAR tool software, no separate subscription

✅ Why buy from MFT Dev

  • We check your gearbox code before you order.
  • Files Service MFT Dev: our engineers also prepare your gearbox files.
  • Tracked shipping worldwide, secure payment by card or bank transfer.

❓ Frequently asked questions

There is no DQ381 or DQ500 connector: what do I do?

The DQ380 pinout is the same as the DQ381 and DQ500: use the TCM-005 connector.

What is the Converter V2 for?

After some cloning jobs, you need to read the gearbox fault codes and live data. The Converter V2 lets you connect a diagnostic tool from another brand to the harness.

Goes well with